Electroweld Industries

Electroweld industries is a leading manufacturer of resistance welding equipment, serving the industry for over 45 years. Our welding machines are designed to provide a production solution at an affordable price while ensuring reliability and low cost maintenance.

Applications: 

• Electroweld Wire Butt Welders are specially designed for the wire and cable processing industry.

• Construction The Electroweld Wire Butt Welders are designed as portable models, with spring loaded clamping devices, and foot pedal release. Main body, housing the welding transformer, fixed and moveable platens is constructed from light alloy. Each machine is mounted on a wheeled trolley type stand provided with brakes. All machines are equipped with annealing facility.
• Upset travel: Movable platen travel on two parallel guides.
• Upset Pressure: Provided by a precision spring action on the movable platen.
• Electrodes: Special wear resistant copper alloy electrodes provided with precision'V'grooves, permit rapid and accurate alignment of wires.
• Current Initiation: Automatic, current make and break via incorporated magnetic contactor. Current initiation effected by a manual push button fitted on one side of the fixed platen and current cut off effected automatically in relation to the preset upsetting distance Separate annealing electrodes for annealing of the welded wire provided.
• Weld Current Adjustment: Adjustment of welding current in 6 steps from 50% to 100% by rotary switch.

• Electrode spacing is adjusted by a lever set against a plate calibrated for wire diameter.
• Upsetting pressure is adjusted by means of a dial calibrated for wire diameter.
• Welding current is selected by a rotary switch.
• Wires to be joined should be cut straight, exactly at right angles and free from burrs.
• Wire ends are clamped by spring loaded clamping device which can be opened singly or together by food pedals.
• Releasing the foot pedals leaves the wire clamped under adequate pressure.
• By the push of the button, welding cycle is initiated and completed automatically by buit-in controls.
• Weld completed, the job is then de-clamped and annealed if necessary in the separate annealing electrodes.

• Power Requirement is 220V AC 50/60Hz or 415V AC 50/60Hz(Price includes customization as per requirement before shipping)
• Butt Welders upto 30KVA can operate on either 2 Lines/Phases 220V (+10%/-10%) or 400V (+10%/-10%) 50/60Hz
• Butt Welders greater than 30KVA can only operate on 2 Lines/Phases 400V (+10%/-10%) 50/60Hz
• Additional set of spares and consumables can be quoted to be added to the shipment as required

Applications: Electroweld Wire Butt Welders are specially designed for the wire and cable processing industry.

Electroweld Wire Butt Welder 12KVA (WBW-14)

- Weldability - Diameter - Steel(< 0.5% Carbon-Unalloyed): 1mm-5mm, Copper: 1mm-4mm, Brass: 1mm-4mm, Aluminium: 1.5mm-6mm

- Weldability - Cross-Sectional Area - Steel(< 0.5% Carbon-Unalloyed): 0.79mm²- 19.63mm², Copper: 0.79mm²- 12.57mm², Brass: 0.79mm²- 12.57mm², Aluminium: 1.77mm²- 28.27mm².

- Weldability - Welding Range - Steel(< 0.5% Carbon-Unalloyed): 18 - 4 AWG, Copper: 18 - 6 AWG, Brass: 18 - 6 AWG, Aluminium: 15 - 3 AWG.

- Weldability - Welding Range - Steel(< 0.5% Carbon-Unalloyed): 14 - 1/0 SWG, Copper: 19 - 6 SWG, Brass: 19 - 8 SWG, Aluminium: 17 - 4 SWG.

- Weldable Materials: Steel, Copper, Brass, Aluminium Light Alloy Metal

Features: The machines are designed for quick and easy operation. The settings for electrode spacing and upsetting pressure are calibrated directly for the different wire size to be welded. The welding process being automatic requires minimal training for operators and ensures uniform welds of high tensile strength, capable of withstanding subsequent drawing.

Construction The Electroweld Wire Butt Welders are designed as portable models, with spring loaded clamping devices, and foot pedal release. Main body, housing the welding transformer, fixed and moveable platens is constructed from light alloy. Each machine is mounted on a wheeled trolley type stand provided with brakes. All machines are equipped with annealing facility.

Upset travel: Movable platen travel on two parallel guides.

Upset Pressure: Provided by a precision spring action on the movable platen.

Electrodes: Special wear resistant copper alloy electrodes provided with precision''V''grooves, permit rapid and accurate alignment of wires.

Electroweld industries is a leading manufacturer of resistance welding equipment, serving the industry for over 45 years. Our welding machines are designed to provide a production solution at an affordable price while ensuring reliability and low cost maintenance.

Applications: 

• Electroweld Wire Butt Welders are specially designed for the wire and cable processing industry.

• The machines are designed for quick and easy operation. The settings for electrode spacing and upsetting pressure are calibrated directly for the different wire size to be welded. The welding process being automatic requires minimal training for operators and ensures uniform welds of high tensile strength, capable of withstanding subsequent drawing.
• Construction The Electroweld Wire Butt Welders are designed as portable models, with spring loaded clamping devices, and foot pedal release. Main body, housing the welding transformer, fixed and moveable platens is constructed from light alloy. Each machine is mounted on a wheeled trolley type stand provided with brakes. All machines are equipped with annealing facility.
• Upset travel: Movable platen travel on two parallel guides.
• Upset Pressure: Provided by a precision spring action on the movable platen.
• Electrodes: Special wear resistant copper alloy electrodes provided with precision'V'grooves, permit rapid and accurate alignment of wires.
• Current Initiation: Automatic, current make and break via incorporated magnetic contactor. Current initiation effected by a manual push button fitted on one side of the fixed platen and current cut off effected automatically in relation to the preset upsetting distance Separate annealing electrodes for annealing of the welded wire provided
• Weld Current Adjustment: Adjustment of welding current in 6 steps from 50% to 100% by rotary switch.

Welding Process:

• Electrode spacing is adjusted by a lever set against a plate calibrated for wire diameter.
• Upsetting pressure is adjusted by means of a dial calibrated for wire diameter.
• Welding current is selected by a rotary switch.
• Wires to be joined should be cut straight, exactly at right angles and free from burrs.
• Wire ends are clamped by spring loaded clamping device which can be opened singly or together by food pedals.
• Releasing the foot pedals leaves the wire clamped under adequate pressure.
• By the push of the button, welding cycle is initiated and completed automatically by buit-in controls.
• Weld completed, the job is then de-clamped and annealed if necessary in the separate annealing electrodes.

Electroweld industries is a leading manufacturer of resistance welding equipment, serving the industry for over 45 years. Our welding machines are designed to provide a production solution at an affordable price while ensuring reliability and low cost maintenance.

Applications: 

• Electroweld Wire Butt Welders are specially designed for the wire and cable processing industry.

• Construction The Electroweld Wire Butt Welders are designed as portable models, with spring loaded clamping devices, and foot pedal release. Main body, housing the welding transformer, fixed and moveable platens is constructed from light alloy. Each machine is mounted on a wheeled trolley type stand provided with brakes. All machines are equipped with annealing facility.
• Upset travel: Movable platen travel on two parallel guides.
• Upset Pressure: Provided by a precision spring action on the movable platen.
• Electrodes: Special wear resistant copper alloy electrodes provided with precision'V'grooves, permit rapid and accurate alignment of wires.
• Current Initiation: Automatic, current make and break via incorporated magnetic contactor. Current initiation effected by a manual push button fitted on one side of the fixed platen and current cut off effected automatically in relation to the preset upsetting distance Separate annealing electrodes for annealing of the welded wire provided
• Weld Current Adjustment : Adjustment of welding current in 6 steps from 50% to 100% by rotary switch.

Welding Process:

• Electrode spacing is adjusted by a lever set against a plate calibrated for wire diameter.
• Upsetting pressure is adjusted by means of a dial calibrated for wire diameter.
• Welding current is selected by a rotary switch.
• Wires to be joined should be cut straight, exactly at right angles and free from burrs.
• Wire ends are clamped by spring loaded clamping device which can be opened singly or together by food pedals.
• Releasing the foot pedals leaves the wire clamped under adequate pressure.
• By the push of the button, welding cycle is initiated and completed automatically by buit-in controls.
• Weld completed, the job is then de-clamped and annealed if necessary in the separate annealing electrodes.